Mophorn 100 Amp Plasma Cutter Pilot ARC 380V Plasma Cutting Machine 35mm Cutting Thickness Portable Plasma Welder IGBT Inverter Digital Plasma Welding Machine features:
- PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life
- HIGH EFFICIENT: Max.100Amp output current, stepless adjustable with LCD display. 60% high duty circle. Voltage compensation to tackle with +/-15% electricity fluctuation. Advanced inveter technology, 85% inverter efficiency. PWM controlled output, lower power consumption
- 35MM CUTTING THICKNESS: Support 1-35mm thickness metal cutting. Faster cutting speed, low noise and smooth cut surface
- SAFETY PROTECTION: Over-heat, over-pressure, over-current and IP21 level protection. Air regulator at back, easy to adjust air pressure
- WIDE APPLICATIONS: Suitable to cut most metals, like: stainless steel, alloy, aluminum, mild steel, carbon steel etc. Can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc
Plasma Cutter Pilot Arc CUT50 Dual Voltage 110V 220V 50A Cutting Non Touch Machine Portable Plasma Cutter (CUT50L) features:
- Non-touch Pilot Arc: it efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; the technology allows you to cut without touching the tip to the metal. It provides a better cutting quality and longer consumable life
- Input and Output: Dual voltage capability allows the machine to run directly on 110V/220V. Plug adapters included, 10-50 A output, 1/2” ideal clean cut and 3/4” maximum severance, Non-HF Blowback Start, there is no HF interference
- Wide Applications: Suitable for cutting stainless steel, alloy steel, mild steel, copper, carbon steel and aluminum, and other metals. Can be widely used at demanding industrial and construction work, or home and hobby us
- Setup Easily: The air regulator and water trap is a combined unit mounted at the back machine, the whole machine can be setup very quickly, and it is to reduce the chance of water entering the plasma torch
